10
ActronConnect Installation & Commissioning Guide - Website
Doc. No.9590-1001 Version No.3.0 150901C
Step 1.2.7.
Connect “PLUG C” (RJ45 Data Plug) into ACM “Socket C” (labelled communication to indoor
board). This plug only goes in one way, ensure it is in correct orientation before pushing it all the way to
“lock” it in. Ensure there is an adequate slack on the cable so that no undue strain is placed on the RJ45
plug. Then screw Antenna into ACM socket and align as per instructions on Appendix A - Requirements
for ACM Optimum Signal Performance.
ACM
Data Socket
ACM
Antenna Socket
Antenna
ACM
Data Socket
“PLUG C”
(RJ45 Data Plug)
Antenna
ACM
Data Socket
Label - ACM
Data Socket
Step 1.2.8.
Check all connections & cables to ensure correct connections and cables are secured properly.
Step 1.2.9.
Power-up the air conditioner by turning-On the main isolator or at the Main Supply Circuit
Breaker in the Distribution Board. Ensure that the air conditioner powers up and operates correctly.
Step 1.2.10.
Perform ActronConnect Module commissioning.
