ActionTec Wireless-Ready DSL Gateway User Manual Download Page 99

Page: 99 / 103

Action

tec Wireless-Ready DSL Gateway User Manual

This device must accept any interference received, including interference that
may cause unwanted operation.

☞

Note

: To comply with FCC RF exposure compliance require-

ments, the antenna used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with
any other antenna or transmitter.

For questions regarding your product or the FCC declaration, contact:

Action

tec Electronics, Inc.

760 North Mary Ave.
Sunnyvale, CA 94086

United States

Tel: (408) 752-7700

Fax: (408) 541-9005

Summary of Contents for Wireless-Ready DSL Gateway








































































































Search results

Summary of Contents for Wireless-Ready DSL Gateway

Reviews:

Related manuals for Wireless-Ready DSL Gateway

Brands by name

Popular brands

ActionTec Wireless-Ready DSL Gateway, User Manual

Search results

Summary of Contents for Wireless-Ready DSL Gateway

Reviews:

Related manuals for Wireless-Ready DSL Gateway

Brands by name

Popular brands