ActionTec Wireless-Ready DSL Gateway User Manual Download Page 53

Page: 53 / 103

Action

tec Wireless-Ready DSL Gateway User Manual

DMZ Hosting

Selecting

DMZ

Hosting

in the “Advanced Configuration” screen generates the

“

DMZ

Hosting” screen. To use

DMZ

hosting, enter the IP address of the computer

on the network to be used as a

DMZ

host in the “

DMZ

Host IP Address” text box,

then click

DMZ

hosting is used to support online gaming and Internet conferencing services.

These programs usually require multiple open ports, making the network accessi-
ble from the Internet.

DMZ

hosting symbolically places the

DMZ

host computer

outside of the Gateway’s network. Access to the network resources while

DMZ

hosting is active is blocked.

Action

tec recommends activating

DMZ

hosting only as

long as necessary.

Warning

: The

DMZ

Host computer will be vulnerable to com-

puter hackers on the Internet while in

DMZ

mode.

Summary of Contents for Wireless-Ready DSL Gateway








































































































Search results

Summary of Contents for Wireless-Ready DSL Gateway

Reviews:

Related manuals for Wireless-Ready DSL Gateway

Brands by name

Popular brands

ActionTec Wireless-Ready DSL Gateway, User Manual

Search results

Summary of Contents for Wireless-Ready DSL Gateway

Reviews:

Related manuals for Wireless-Ready DSL Gateway

Brands by name

Popular brands