ActionTec Wireless-Ready DSL Gateway User Manual Download Page 93

Page: 93 / 103

Action

tec Wireless-Ready DSL Gateway User Manual

When the “TCP/IP” window appears, select

Edit

from menu bar, then select

User Mode

When the “User Mode” window appears, select

Advanced

, then click

In the “TCP/IP” window, select

Ethernet

from the “Connect via” drop-down

list

Select

Using DHCP Server

from the “Configure” drop-down list.

Ensure the “Use 802.3” option is

not

checked.

Disregard any addresses in the IP Address text boxes. They will be reacquired
when the first connection is made.

Click

Options

and when the “TCP/IP Options” window appears, select

Active

. Ensure the “Load only when needed” option is

not

checked, then click

Close the “TCP/IP” window and when prompted to save changes, click

Save

10.

Restart the computer. The TCP/IP settings are configured.

Next, go to “Connecting to the ISP” on page 86.

Summary of Contents for Wireless-Ready DSL Gateway








































































































Search results

Summary of Contents for Wireless-Ready DSL Gateway

Reviews:

Related manuals for Wireless-Ready DSL Gateway

Brands by name

Popular brands

ActionTec Wireless-Ready DSL Gateway, User Manual

Search results

Summary of Contents for Wireless-Ready DSL Gateway

Reviews:

Related manuals for Wireless-Ready DSL Gateway

Brands by name

Popular brands