ActionTec Wireless-Ready DSL Gateway User Manual Download Page 61

Page: 61 / 103

Action

tec Wireless-Ready DSL Gateway User Manual

DSL Settings

To access

DSL

Settings, select

DSL

Settings

from the “Utilities” screen. The

Gateway’s

VPI

VCI

, Mode, and QoS (Quality of Service) settings can be changed

from here.

Action

tec recommends not changing these values without consulting

the

ISP

Restore Default Settings

To restore the Gateway to its factory default settings, select

Restore Default

Settings

from the “Utilities” screen. When the “Restore Default Settings” screen

appears, click

Restore Default Settings

. Any changes made to the Gateway’s settings

will be lost and the factory default settings will be restored. During this process, the
Gateway’s power

LED

flashes and the Gateway is disabled.

Warning

: Do not unplug the power adapter from the Gateway

during the Restore Default Settings process. Doing so may result
in permanent damage to the Gateway.

When the power

LED

stops flashing and glows steadily green, the Gateway is fully

operational.

Summary of Contents for Wireless-Ready DSL Gateway








































































































Search results

Summary of Contents for Wireless-Ready DSL Gateway

Reviews:

Related manuals for Wireless-Ready DSL Gateway

Brands by name

Popular brands

ActionTec Wireless-Ready DSL Gateway, User Manual

Search results

Summary of Contents for Wireless-Ready DSL Gateway

Reviews:

Related manuals for Wireless-Ready DSL Gateway

Brands by name

Popular brands