ACTi ZNR Series User Manual Download Page 94

Page: 94 / 121

www.acti.com

User

’s Manual

Multicast

Multicast can be used to realize live view when the number of connecting Web clients exceeds
the limit the NVR can accommodate.

Click

Network

Advanced

Multicast

Select the check box to enable multicast, and then enter the multicast IP and port number.

Click

Apply

to save the settings.

Live View Protocol

Multicast

under

Setup

Client

NOTE:

Set the multicast IP correctly. Multicast address is class D address with the range

224.0.0.0 through 239.255.255.255; some are for special use:



224.0.1.0--238.255.255.255 can be used on the Internet.



224.0.0.0-244.0.0.255: only for use on LAN.



224.0.0.1: all-hosts group address, which refers to all the multicast-capable hosts
and routers on a physical network.



224.0.0.2: for all routers on this subnet.



224.0.0.5: for all OSPF routers.



224.0.0.13: for all PIMv2 routers.



239.0.0.0--239.255.255.255 are for private use like 192.168.x.x.

Summary of Contents for ZNR Series


























































































































Search results

Summary of Contents for ZNR Series

Reviews:

Related manuals for ZNR Series

Brands by name

Popular brands

ACTi ZNR Series, User Manual

Search results

Summary of Contents for ZNR Series

Reviews:

Related manuals for ZNR Series

Brands by name

Popular brands