www.acti.com
www.acti.com
User
’s Manual
92
FTP
Use this function to automatically upload images to a preconfigured FTP server. Only certain
NVR models support this function.
1.
Click
Network
>
Advanced
>
FTP
.
2.
Select
the check box to enable FTP.
3.
Enter the IP address of the FTP server, username and password, remote directory, and
upload interval.
NOTE:
Click
Test
to verify whether an FTP connection can be established.
If the remote directory is not specified, the system will create different folders directly
by IP, time and camera. You may also specify a remote directly, for example,
FTPtest/
xxx
/
xxx
, then the system will create the directory first and then create folders
by IP, time and camera.
4.
Select the desired camera and then click
right to
Upload Schedule
. In the
Upload
Schedule
window, select the desired image type and set time periods.
NOTE:
If you select
Event
,
Motion
,
Alarm
or
Video Loss
, you also need to have configure
the corresponding alarm-triggered snapshot. For example, if you select
Motion
, you
need to configure alarm-triggered snapshot (select
Motion
in the
Edit Schedule
window).
To apply the same settings to other days in a week, select the desired days right to
Copy To
.
5.
(Optional) Apply the same settings to other cameras by clicking
right to
Copy
and then
selecting desired cameras.
6.
Click
Apply
to save the settings.
NOTE:
To apply the same settings to other cameras, click
right to
Copy
, select cameras
and then click
OK
.
