www.acti.com
www.acti.com
User
’s Manual
28
b.
Click
Custom Add
. In the window displayed, enter the IP address and complete
other settings, and then click
Add
. You may also click
Search Segment
and add
discovered cameras in the list.
c.
Click to add the camera.
NOTE:
For a Digital Video Server (DVS), a window appears when you click
Add
, and you need
to select channels to add
the connected
cameras.
Option 2
This option is not applicable to NVRs with PoE ports or switching ports.
1.
Click in a window.
2.
Select the desired IP device and then click
Add
.
Option 3
Use this option to add an IP device that is connected to a different router, for example, when the
NVR and the IP device are connected across the Internet.
NOTE:
First you need to enable port mapping at
Setup > Port > Port Mapping
on the IP device
web interface.
1.
Click
Camera > Camera
, click
Custom Add
.
2.
Choose an option:
By IP
a.
On the IP device web interface, go to
Setup > Port > Port Mapping
,
find the external IP (public IP) and external port number.
b.
On the NVR, select a protocol, enter the above-mentioned IP address
and port number, enter the username and password.
c.
Click
OK
.
By MyDDNS
a.
On the IP device web interface, go to
Setup > Network > DDNS
,
enable DDNS, select
MyDDNS
, set a domain name and get the server
address.
NOTE:
After setting the domain name, check that you can use the
device address to access the IP device web interface.
Make sure the MyDDNS server and the NVR are connected
(ping the MyDDNS server from the NVR).
