www.acti.com
www.acti.com
User
’s Manual
42
Setting a Preset Patrol
Set the PTZ camera to patrol by presets (go from one preset to the next in specified order). You
need to set presets first and then select some as keypoints. Up to four patrol routes (Preset
Patrol 1, 2, 3 and 4) are allowed for each PTZ camera, and each patrol route can have up to
eight presets (keypoints). After setting presets, follow the steps to set a preset patrol. The
following takes preset patrol 1 as an example.
1.
In the
PTZ Management
window, click
. A window is displayed as follows.
2.
Select a preset from the drop-down list, set the duration (time the camera stays at the
preset, unit: second), and then set the rotation speed (1: slowest, 9: fastest). Click
OK
to
save the settings. The preset is added as a keypoint.
3.
Repeat the above steps to add all presets (keypoints), and adjust the sequence of these
presets by clicking
or
. Modify or delete a preset by clicking
or
. Clicking
will delete all the added keypoints.
4.
After completing the configuration, click
Apply
to save the settings. Now keypoints for preset
patrol 1 is complete.
5.
Click
right to the drop-down list to start preset patrol 1. To stop, click
.
NOTE:
The duration ranges from 0 to 1800 seconds (default: 10). The rotation speed ranges
from 1 to 9 levels (default: 5).