www.acti.com
www.acti.com
User
’s Manual
80
People Counting
People counting is used to count the number of people entering or leaving an area. Only certain
NVR models support this function. This function cannot be used at the same time with other VCA
functions.
1.
Select the
Enable Shoulder Demarcation
. Draw a virtual line on the screen to set the
minimum width of detection. People narrower than the set width will be ignored.
2.
Click the
Draw
button and then draw rules on the left. Set entrance direction and sensitivity,
as needed.
3.
By selecting
Enable Clear by Schedule
, you can have people counting OSD reset at a
specificied time every day. You may also click
Clear Counting Result
to clear the OSD
immediately. Resetting people counting OSD only changes the OSD. It does not change
report statistics.
4.
Click
Apply
to save the settings.
Defocus Detection
Use defocus detection to check whether the camera focuses properly.
1.
Click
right to
Trigger Actions
and set action(s) to trigger. For more details, see
2.
(Optional) Click
right to
Arming Schedule
and then set the time when actions will be
triggered.
3.
Set detection sensitivity and then click
Apply
to save the settings.
