www.acti.com
VMGB-
370 User’s Manual
13
Access the Camera
Now that the camera and the PC are both having their unique IP addresses and are under the
same network segment, it is possible to use the Web browser of the PC to access the camera.
Open the web browser, input the IP address of the camera, and then press
Enter
to go to the
login page.
Assuming that the camera’s IP address is
192.168.0.100
, type the following address into Web
browser’s address bar:
http://192.168.0.100
Upon successful connection to the camera, the user interface will appear together with the login
page.
Before logging in, the admin user should configure first the device account and password. This
account and password will be used for future administrator logins.
NOTE:
You may be prompted to install the necessary plug-ins in before viewing the live video
and operating the camera. Follow the on-screen instructions to install plug-ins.
NOTE:
The Admin user can set the login attmeps with the wrong password. When your login
attempts with the wrong password reach the set times, the device is locked. Go to
Configuration
> System > Security > Security Service
, and enable
Enable Illegal Login lock
, and set the
illegal login attempts.