www.acti.com
VMGB-
370 User’s Manual
67
Set RS-232
RS-232 can be used to debug device or access peripheral device. RS-232 can allow
communication between the device and computer or terminal when the communication distance
is short.
Connect the device to computer or terminal with RS-232 cable.
1. Go to
Configuration → System → System Settings → RS-232
.
2. Set the RS-232 parameters to match the device with the computer or terminal.
3. Click
Save
.
Set RS-485
RS-485 is used to connect the device to external device. You can use RS-485 to transmit the data
between the device and the computer or terminal when the communication distance is too long.
Connect the device and computer or termial with RS-485 cable.
1. Go to
Configuration → System → System Settings → RS-485
.
2. Set the RS-485 parameters.
NOTE:
You should keep the parameters of the device and the computer or terminal all the same.
3. Click
Save
.
Set Same Unit
Set the same temperature unit and distance unit. When you enable this function, the unit cannot
be configured separately in other setting pages
1. Go to
Configuration
→
System
→
System Settings
→
Unit Settings
.
3. Check
Use Same Unit
.
4. Set the temperature unit and distance unit.
5. Click
Save
.