www.acti.com
VMGB-
370 User’s Manual
63
NOTE:
The obtained IP address is dynamically assigned via PPPoE, so the IP address always changes
after rebooting the camera. To solve the inconvenience of the dynamic IP, you need to get a
domain name from the DDNS provider (e.g. DynDns.com). Refer to
Set ONVIF
If you need to access to the device through ONVIF protocol, you can configure the ONVIF user to
enhance the network security.
1. Go to
Configuration → Network → Advanced Settings → Integration Protocol
.
2. Check
Enable ONVIF
.
3. Click
Add
to configure the ONVIF user.
Delete
Delete the selected ONVIF user.
Modify
Modify the selected ONVIF user.
4. Click
Save
.
5. Optional: Repeat the steps above to add more ONVIF users.
Set HTTP Listening
The device can send alarms to destination IP or host name through HTTP protocol. The
destination IP or host name should support the HTTP data transmission.
Steps
1. Go to
Configuration → Network → Advanced Settings → HTTP Listening
.
2. Input
Destination IP
or
Host Name
,
URL
, and
Port
.
3. Click
Test
.
NOTE:
Click Default to reset the destination IP or host name.
4. Click
Save
.