manualshive.com logo in svg

Acteon X-MIND unity, Operator'S Manual, Page: 55 / 80

Share
Download
Acteon X-MIND unity Operator'S Manual Download Page 55

Page 55 of 79

ENGLISH

Operator’s manual • X-Mind unity • VH • (15) • 09/2017 • NUN0EN010H

ERROR MESSAGES

I

n the case of malfunction or an event error, the display will indicate an error code together with acoustic signals (5 beeps). Furthermore an 

error symbol is shown on the display, warning the operator about the error status. 

All functions are inhibited until the error status is fixed or restored.

Some errors can be cleared by pressing the reset button 

 on the keypad. 

Le graphique suivant comprend une liste de message d’erreur pouvant apparaître lors du fonctionnement du système radiographique X-

MIND unity. 

The following chart gives a list of error messages that will appear should the X-MIND unity experience a malfunction. 

The error codes have the following format: 

• 

The letter “E” followed by a number that identifies the faulty unit (timer or tubehead)

•  “1”: Fault is located in the timer (control unit)

•  “2”: Fault is located in the tubehead

99

Summary of Contents for X-MIND unity

















































































Reviews:

No comments