manualshive.com logo in svg

Acteon X-MIND unity, Operator'S Manual, Page: 30 / 80

Share
Download
Acteon X-MIND unity Operator'S Manual Download Page 30

Page 30 of 79

Operator’s manual • X-Mind unity • VH • (15) • 09/2017 • NUN0EN010H

ENGLISH

5.1.CHECK THE SELECTED TYPE OF CONE

The icon cone type icon (shape of the beam limiting device) in use should be illuminated

Icon “rectangular” ON: 

 Indicates that the selected tube head is equipped with rectangular cone

Icon “round” ON: 

 Indicates that the selected tube head is equipped with round cone

   PLEASE NOTE

This selection can be enabled or disabled by means of a specific procedure that has to be performed by an authorized and trained technician 

only. 

Contact your authorized installer or the local Acteon Customer Service number on page 3 & 4 of this manual for further information.

   PLEASE NOTE

After the modification, default exposure values will be automatically changed according to the new settings.

 CAUTION

Before making an exposure, be sure that you are using the same cone type and size indicated on the display of the control unit, otherwise all 

the pre-programmed exposure settings and relevant dose related information will be completely incorrect!

5.2.CHECK THE SOURCE TO SKIN DISTANCE

Make sure the cone being used matches the type indicated by the cone length icon which should be illuminated on the control panel at this 

time (source-skin distance = SSD)

Icon 20 [cm] 8” ON: 

 Indicates that the selected tube head is equipped with 8” = 20cm (SSD) cone

Icon 30 [cm] 12” ON: 

 Indicates that the selected tube head is equipped with 12” = 31cm (SSD) cone

   PLEASE NOTE

The modification, installation and configuration of a different type of beam limiting device can be enabled or disabled only by authorized 

and trained service technician. 

Contact your authorized installer or the local Acteon Customer Service number indicated on page 3 & 4 of this manual for further informa-

tion.

   PLEASE NOTE

After the modification, default exposure values will be automatically changed.

 CAUTION

Before making an exposure, be sure that you areusing the same cone type and size indicated on the display of the control unit otherwise all 

the pre-programmed exposure settings and relevant dose related information will be completely incorrect! 

It is not contraindicated to use any type of beam limiting other than those provided by de Götzen S.r.l.

Summary of Contents for X-MIND unity

















































































Reviews:

No comments