manualshive.com logo in svg

Acteon X-MIND unity, Operator'S Manual, Page: 40 / 80

Share
Download
Acteon X-MIND unity Operator'S Manual Download Page 40

Page 40 of 79

Operator’s manual • X-Mind unity • VH • (15) • 09/2017 • NUN0EN010H

ENGLISH

5.11. POSITIONING THE PATIENT

Comfortably seat the patient and follow the standard intra-oral procedures for correct patient positioning.

5.12. POSITIONING FILM OR SENSOR

Positioning either the film or the digital sensor depending on the technique and exam type to be used.

!

 WARNING

According to the x-ray examination to perform and the relevant technique, it is strongly recommended to use a shielded, open-ended posi-

tion-indicating device (PID, x-ray detector support holder) in order to maintain precise positioning during the examination and also to help 

the operator avoid common errors by specifically directing the X-ray beam toward the receptor.

 CAUTION

The disposable protection covers used for any type of x-ray detector support, can cause dangerous injuries even death if swallowed! 

Please use the disposable protectors as recommended by their respective manufacturers and make sure they are firmly secured on the sup-

port and cannot move in the mouth or in the throat of the patient! 

It is furthermore mandatory to carefully follow the operating instructions and take observe all safety measures according to the respective 

manufacturers of the x-ray detectors (FILM/X-RAY DIGITAL SENSORS/PSP, etc.), used by the operator.

Summary of Contents for X-MIND unity

















































































Reviews:

No comments