background image

 
 

HE Series Central Chillers

   •   

882.03862.00

   •   12/02/2021             

iii

 

Technical Assistance 

Parts Department 

Call toll-free Monday – Friday, 7am–5pm CST [800] 423-3183 or call [262] 641-3950, Fax [262] 641-
8615 
 
The  ACS  Customer  Service  Group  will  provide  your  company  with  genuine  OEM  quality  parts 
manufactured to engineering design specifications, which will maximize your equipment’s performance 
and efficiency.  To assist in expediting your phone or fax order, please have the model and serial number 
of your unit when you contact us.  A customer replacement parts list is included in this manual for your 
convenience.  ACS welcomes inquiries on all your parts needs and is dedicated to providing excellent 
customer service.

 

Service Department 

Call toll-free Monday – Friday, 8am–5pm CST [800] 423-3183 or call [262] 641-3950 
Emergencies after 5pm CST, call [847] 439-5655 
We have a qualified service department ready to help. Service contracts are available for most 
products. 

Sales Department

 

Call [262] 641-3950 Monday–Friday, 8am–5pm CST  
Our products are sold by a world-wide network of independent sales representatives. Contact our Sales 
Department for the name of the sales representative nearest you.

 

Contract Department 

Call [262] 641-3950 Monday–Friday, 8am–5pm CST  
 

Let us install your system. The Contract Department offers any or all of these services: 
project planning; system packages including drawings; equipment, labor, and 
construction materials; and union or non-union installations.

 

 

Disclaimer: 

All rights reserved. No part of the contents of this manual may be reproduced, copied, or 
transmitted in any form or by any means including graphic, electronic, or mechanical methods or 
photocopying, recording, or information storage and retrieval systems without the written 
permission of the publisher, ACS Group, unless it is for the purchaser’s personal use. The 
information in this manual is subject to change without notice and does not represent a 
commitment on the part of ACS Group. Manufacturer reserves the right to change specifications, 
design without notification or obligation. 
 ACS Group does not assume any responsibility for any errors that may appear in this manual. In 
no event will ACS Group be liable for technical or editorial omissions made herein, nor for 
direct, indirect, special, incidental, or consequential damages resulting from the use or defect of 
this manual. The information in this document is not intended to cover all possible conditions 
and situations that might occur. The end user must exercise caution and common sense when 
installing, using, or maintaining ACS Group products. ACS Group products should only be 
installed by qualified, experienced technicians. If any questions or problems arise, call ACS 
Groups customer service at 800-423-3183. Any change to an ACS Group product made during 
the installation, start-up, or at any other time must be submitted in writing to ACS Group for 
approval and be approved by ACS Group in writing prior to commission. The product warranty 
is voided when any unapproved change is made to an ACS Group product.

Summary of Contents for HE Series




















































































Reviews: