ACS HE Series, Operation And Instruction Manual

Page: 29 / 83

HE Series Central Chillers • 882.03862.00 • 12/02/2021
29

Flanged/valved chilled water To Process and From Process connections. Adjust the shut-off
valves provided with the unit to control the flow rate to process and for completely isolating
the chiller from the process.
Warning! Operating the chiller tank temperature setpoint below 50°F (10°C)
without the proper amount of glycol for freeze protection could result
in a damaged evaporator. ACS Group does not warrant the freeze up
of the evaporator under any circumstances.

The tower or city water condenser cooling in and out connections should be completed and an
adequate supply of 85ºF (30ºC) tower or 70ºF (21ºC) city water, at 25 psi (1.7 bar/0.17 MPa)
pressure, for proper operation.
The crankcase heater is automatically energized when the main power is applied (main power switch
in the ON ( | )position. It should be on for at least 24 hours before startup to force dissolved
refrigerant from the compressor oil.
4-14 Ship Loose Items