20 of 23
PT 100 SETTING
The display shows:
“PT100 SETTING
or calibration of the sensors for the temperatures
to continue as it follows:
1. Press
ENTER
to confirm.
The display shows:
“PT100 n° 01”
2. Press
UP/DOWN
to select the probe
3. Press
ENTER
The display shows:
“CONNECTED “
4. Press
UP/DOWN
to select among „CONNECTED “or „NOT CONNECTED “
5. Press
MENU
The display shows for istance:
“T=55°C “
If the display shows 99,9°C it means that the selected
zone is not available.
6. Press
UP/DOWN
for adjust the temperature read with that in relief
7. Press
ENTER
. The display shows “Confirm?” Press
ENTER
to confirm
the change or
ESC
to not confirm
8. Press the key
ESC
to pass to the following menu
Summary of Contents for ELECTRONIC 3
