ACRS ELECTRONIC 3, Instruction Manual & Recipes

Page: 10 / 52

instruction for the user
10
ALARMS
The display indicates various malfunctions:
"AUTOTIMER ON"
after the set Autotimer period the pumps stop but the conveyor continues
to run to permit the loading of other dishes.
"LIMIT SWITCH ON",
the conveyor stops when the limit switch on the outlet is activated. The
conveyor starts automatically when dishes are removed from the outlet.
"DOORS OPEN".
The machine stops automatically when the doors are opened.
"EMERGENCY PUSH BUTTON ACTIVATED".
“BOOSTER SAFETY THERMOSTAT ACTIVATED”
“TANK EMPTY”
“DRIVE MOTOR HAS JAMMED”
“TERMAL-SWITCH ON”
“LOW WATER INLET TEMPERATURE”
“LOW RINSE WATER TEMPERATURE”
“DRYER SAFETY THERMOSTAT ACTIVATED”
“WATER INLET QUANTITY NOT SUFFICIENT”
DATASHOWING
The display shows:
“MACHINE READY”.
“PUSH START TO START THE WASHING”.
“DRIVE SYSTEM NOT STARTED, X SPEED”
1. Push twice MENU button .
2. push ENTER button .
3. Push UP/DOWN buttons (Every pressing calls the following texts one after the
other on the display ):
“AUTOTIMER xxxsec."
“RINSE PROLONGATION xxxsec.”
“HYDRAULIC SUPPLY T=xx°C,
“SECTOR 1,............SECTOR 8, T=x°C, T SETPOINT T=x°C”
“STEAM COMSUMPTION”
"ENERGY CONSUMPTION"
"TOTALS WASHING TIME H xxxxx"
"MAINTENANCE AFTER H xxxxx"
4. Push ESC button.
5. Push ENTER button .