ACRS ELECTRONIC 3, Instruction Manual & Recipes

Page: 42 / 52

13 of 23
6. Press MENU
The display shows:
“T-alarm “
„T=-15°C“
In this menu you can adjust the value of temperature below the set
point for which the alarm „LOW RINSE WATER TEMPERATURE “is
given.
7. Press UP/DOWN to change the difference of temperature.
8. Press MENU
The display shows:
“DON'T STOP THE DRIVE MOTOR“
It means that if the temperature of the rinse goes down
below the alarm temperature previously regulated, the
drive motor will be not stopped.
9. Press UP/DOWN to change the data in „Stops the drive motor“ if needed.
10. Press ENTER . The display shows “Confirm?” Press ENTER to confirm
the change or ESC to not confirm
The display shows again:
“ THERMOREGULATION SECTORS”
11. Press the key Menu to pass to the following menu
SANITIZING SYSTEM
The display shows:
“SANITIZING SYSTEM”
to continue as it follows:
1. Press ENTER to confirm.
2. Press UP/DOWN to choose among „connected “or „not connected“ in case the
machine is provided or less than this optional.
If the display shows:
“CONNECTED”