12 of 23
4. Press
UP/DOWN
to change the denomination of the zone (if necessary).
5. Press
MENU
The display shows:
“T-setpoint “
“T=45 °C “
6
.
Press
UP/DOWN
to adjust the temperature
7. Press
ENTER
. The display shows “Confirm?” Press
ENTER
to confirm the
change or
ESC
to not confirm
Rinse temperature setting
The display shows:
“SECTOR 7 “
1. Press
ENTER
to confirm.
The display shows:
“RINSE”
2. Press
MENU
The display shows:
“T-setpoint “
“T=80 °C “
3. Press
UP/DOWN
to regulate the desired temperature
4. Press
MENU
The display shows:
“t-advance “
“T=-05°C”
To avoid the boiling of the water into the booster when the rinse
doesn’t work, this device disconnect the booster heaters below the
value of set point; in the case heaters are disconnected 5° below the
set point.
5. Press
UP/DOWN
to change the data.
Summary of Contents for ELECTRONIC 3
