Shielded 80-pin cable.
F1 Help
↓
Select Item -/+
Change Values
F5 Setup Defaults
Esc Exit
←→
Select Menu Enter Select Sub-Menu F10 Save and Exit
Place the marker on the value of the Type parameter ([Auto] in this case) and press
the
Enter
key to open the list of possible values of this parameter; for example:
None
Auto
User Type HDD
CD-ROM
LS-120
ZIP-100
MO
Other ATAPI Device
Use the
Up
and
Down
keys to select the User Type HDD value and press the
Enter
key to get to the following screen:
AwardBIOS Setup Utility
Main
Primary Master [User Type HDD]
Item Specific Help:
Type
[User Type HDD]
<Enter> to select the type
Translation Mode
[LBA]
of the IDE drive.
Cylinders
[………0]
[User Type HDD] allows
Head
[……0]
you to set each entry on
Sector […0] your
own.
CHS Capacity
0MB
Maximum LBA Capacity 0MB
Warning: Ultra DMA Mode
3/4/5 can be enabled only
Multi Sector Transfer
[Maximum]
when BIOS detects
SMART Monitoring
[Disabled]
Shielded 80-pin cable.
PIO Mode
[4]
Ultra DMA Mode
[5]
F1 Help
↓
Select Item -/+
Change Values
F5 Setup Defaults
Esc Exit
←→
Select Menu Enter Select Sub-Menu F10 Save and Exit
Enter the values of Translation Mode, Cylinders, Head and Sector parameters (you
can find them on the case of the hard disk) to finish the initial configuration of the
hard disk with BIOS.
Translation Mode parameter can have the following values:
LBA
Large
Normal
Match Partition Table
Manual
New versions of AwardBIOS menu have the
Boot
item. The screen of the
Boot
menu, which is responsible for adjusting the boot sequence, looks like this:
AwardBIOS Setup Utility
Main Advanced Power Boot Exit
1. ATAPI CD-ROM
[None]
Boot Sequence:
78 Copyright © Acronis, Inc., 2000-2006
