12
6.4 Key operation instructions
6.4.1 AIM-R100 residual current monitor key operation in programming mode
(1) Enter the programming mode
In normal operation, press the "menu/Enter" key to enter the programming mode password entry page. After
entering the correct password, press enter to enter programming mode. The default password is 0001.
(2) Quit the programming mode
In programming mode, press "self-check/return" to directly return to the operation interface.
(3) System password setting
Select the option [password setting] in programming mode and press enter to enter. Change the system
password by "up" and "down", and press "self-check/return" to exit after the change is completed. Press "Enter"
to save the change to [Yes] and exit. Operation examples are as follows:
(4) Time setting
Select the option [time Settings] in programming mode and press enter to enter. Change the system time by
"up", "down", and press "self-check/return" to exit after the change is completed. Press "Enter" to save the change
to [Yes] and exit. Operation examples are as follows:
(5) Communication Settings
[Communication Setting] is to set the communication parameters between the residual current monitor and
the centralized alarm and display instrument. It belongs to the menu of the same level as "password setting", and
the entry steps are the same. Press "Self-check/Return" to exit when the setup is complete. Press "Enter" to save
Press Menu
Set Comm SetAlarm
Set Pwd Set Time
Input Password
0000
2015-07-02
12:30:45
L1: 30mA L2:Break
L3: 6mA L4:Close
Set Password
0001
Save Settings？
Yes No
Press Up and Down to input password
Press Enter to confirm
Press Up and Down to set password,
press Esc to save or exit
Press Enter to confirm
Press Up and Down to
select the option and
press Enter to confirm.
Set Comm SetAlarm
Set Pwd Set Time
Set Time
2015-07-02 12:30:45
Set Comm SetAlarm
Set Pwd Set Time
Set Comm SetAlarm
Set Pwd Set Time
Save Settings？
Yes No
Press Up and Down to set value,
press Esc to save or exit
Press Up and Down to
select the option
Press Enter to confirm
Press Up and Down to
select the option
Press Enter to confirm
