Acom LS-100, Owner'S Manual

Page: 61 / 76

57
If you clean the TPH (see Maintenance section) and any of these
problems persist, then it is possible that the platen may be damaged or
that the TPH has been scratched or damaged. Call your Acom
Authorized Dealer for service. Do not attempt to service the TPH
yourself! The TPH has high voltage and can get extremely hot during
normal use and even hotter in some “damaged” conditions. If you
attempt to repair the unit yourself, you risk injury and voiding your
warrantee.
The Print Key
The
PRINT
key is used to print labels in Sales mode, and as an Enter
key in Programming mode. In Programming mode, the
PRINT
key and
the
Enter
key are equivalent. The
PRINT
key can only issue labels in
Sales mode when there’s a PLU called up & Total Price > 0.00. Even
if you are in Auto or Pre-Pack modes, you can still use the
PRINT
key.
The Clear Key
The
C
key is used to clear erroneous numeric entries and to
“unload” or clear a PLU that has been called up in Sales mode.
The Clear key with By Weight PLUs:
1. Start from the Initial State .
2. Call up a By Weight PLU.
3. If you press the
C
key:
‰
if Unit Price = 0.00 then go to step 4, or else…
‰
the Unit Price is changed to 0.00 and you go to step 3.
4. The PLU is cleared. You are at the Initial State .
In other words, pressing the
C
key once will clear the Unit Price;
pressing it a second time will then clear the PLU.
The Clear key works similarly with By Count PLUs except that it will
clear the Piece or Price depending on the state of the
FOR
key. Just
like with By Weight PLUs, the first key press of the Clear key will set
the Pieces (or Price) to 0; the second press will clear the PLU.