manualshive.com logo in svg

Acom LS-100, Owner'S Manual

Share
Download
Acom LS-100 Owner'S Manual Download Page 17

 

13 

 

There is a Speed Key Template which you can pull out of the Alpha 
Keypad.  This template can be used to write or label each of the 60 
keys.  You can also use our digital template available in Microsoft

®

Word format included with the LS-100 Software Package.  Its is also 
available as a free download on our website at: 

http://www.acomamerica.com/. 

The LS-100 has a fractional pricing feature which enables you to price 
items at ½ pound or ¼ pound.  This feature can only be enabled by an 
Acom Authorized Dealer.  You can use the Fractional Pricing Speed 
key template that is available on our website. 
 
 
 
 
 
 
 
 

Alpha Keypad 

 

 

Whenever you need to access the Alpha Keypad, you must remove 
the Speed Key Template so that you may see the Alpha keys that lie 
below. 
 
 
 
 
 
 
 

 
 
 
 
F1 Key

 is used to access the 

PLU Quick Price Change

programming 

feature from the Main Menu. 

 

F2 Key

 is used to enable & disable the Temporary Date Print Inhibit. 

 
F3 to F5 keys

 are reserved for future use. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for LS-100













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands