27
The LFA (Label Feed Adjustment) adjusts the print position of a label.
It is independent of the LFS number and can range from 0 to 40; 20
being the default value. The higher the number the lower things will
print on the label; the lower the number the higher things will print.
To set the Label Feed Adjustment:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
7
1
.
3. Change the LFA number and press
; as you type the
number it will appear in the Total Price Display.
4. Press
ESC
SET
.
5. You are back in the
Initial State
.
You may need to test print 2 or three labels to notice the change in
adjustment. Additionally, you may need to repeat this procedure to get
your desired alignment.
Note:
there is no way to individually align any
fields (like Total Price, Sell By Date, etc.) If you cannot properly align
the print, then one of the following may have occurred:
You are using the wrong LFS number or have the wrong labels
installed in the scale.
You are using defective labels that have a “shift in registration”
error. This means that when the labels were manufactured, the
pre-printed color items on the label were printed too high, too low,
or incorrectly. This problem occurs most often when you do not
use Acom Certified Labels.
Here is a sample (blank) of the label that new LS-100s come with and
some sample prints of labels that need adjustment:
