44
Auto Print Setting
When the LS-100 is in Pre-Pack mode, it is capable of auto printing
labels. This feature is very useful for pre-packing; however, if the Auto
Print Setting is set too low, the scale will tend to print more labels than
you intend. This is remedied by the Auto Print Setting (APS.) The
APS determines the amount of “weight change” required before the
scale prints a new label. By default, the scale is set up for a “0.04 lb”
weight change which should be good enough for most pre-pack
applications. You can set it higher or lower.
To modify the Auto Print Setting:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
5
1
.
3. Enter the weight value you want. The default setting is “0.04 lb.”
4. Press
ESC
SET
to save the setting and return to the
Initial State
.
PLU Temporary Price Change Setting
The LS-100 can be set up to allow or disallow temporary price changes
during Sales mode operations. For example, you may have a PLU that
is priced at $1.00/lb but you want your employees to be able to change
the price for some customers or coupons: if you “allow temporary price
changes” then they will be able to change the price during Sales mode;
otherwise, they will not be able to temporarily change the prices.
Open priced PLUs are treated differently. Open priced PLUs are PLUs
that are programmed with a zero price; when these are called up in
Sales mode, their prices can be temporarily changed from zero
regardless of the PLU Temporary Price Change Setting.
To modify the PLU Temporary Price Change Setting:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
8
4
.
3. Press
1
to allow price changes or press
0
to NOT
allow price changes. The default setting is 1.
4. Press
ESC
SET
to save the setting and return to the
Initial
State
.
