manualshive.com logo in svg

Acom LS-100, Owner'S Manual

Share
Download
Acom LS-100 Owner'S Manual Download Page 18

 

14 

 

S1 Key

 reserved for future use. 

 
S2 Key

 changes between languages:  when the Lang Lamp is off, then 

the scale is in English typing; when on, the scale is in 2

nd

 language

mode.  

Note:  The maximum number of characters that you can 

type in any text field is cut in half when you use the second 
language; because, the second language uses DBCS (Double 
Byte Character System.)

 

 
Del Key

 is used to delete characters like on a PC. 

 

Ins Key

 is used to switch between Insert and Overwrite typing mode. 

 

SPACE Key

 is used to enter a space character like on a PC. 

 

TSW

 

X

 keys

 are used to navigate menus & sub-menus like on a PC. 

 

Enter Key

 is used like an Enter key on a PC. 

 

Shift Key

 is used like a Shift key on a PC except that it is temporary: 

you must press it before every upper case letter. 
 

Caps Lock Key

 is used like a Caps Lock key on a PC. 

 

Back Space Key

 is used like a Back Space key on a PC. 

 

“QWERTY” keys

 are used like the keys on a PC. 

 

Safety First 

 

 

It is extremely important to be aware of personal safety whenever 
operating or maintaining this equipment.  Wherever possible, we have 
tried to place warning labels and other helpful indicators at the actual 
location on the equipment where the danger is most apt to occur; 
however, it is not always possible to foresee all dangerous situations. 
Warnings and cautions that are necessary for the safe operation of the 
scale are contained in this manual.  Please, make sure to carefully 
read ALL warnings and cautions before operating the scale.

 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for LS-100













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands