9
KOOLMASTER PP20-VS2 rev.00
KOOLMASTER PP20-VS2
INSTALLATION SETUP
4.
4.1. Setting the Time &
Date
Select:
1.
Current Conditions (Main Menu)
Time / Date
Wed May 12 200X
12 : 12 : 12 AM
Press the right-arrow key once. The current
2.
month flashes on the display.
Use the adjustment buttons to adjust the
3.
month.
Press the right-arrow key to step to the
4.
next parameter.
Proceed in similar fashion to set the whole
5.
time and date.
4.2. Password
The controller can use 3 password levels:
User 1 password [1-1-1-1]
This password provides access to temperature
set points, minimum ventilation settings and
to the animal count menu. If many password
levels are used, the controller automatically
selects this user level after 15 minutes of
inactivity.
User 2 [2-2-2-2]
This password provides access to all menus
except for installation setup menus. This
password can be modified as explained
below.
Installer password [0-6-1-0]
This password provides access to all func-
tions of the controller. It can be modified as
explained below.
Using passwords is optional. Refer to the
Installation Setup section of this manual to
enable or disable passwords (section 4.5).
Refer to the Installation Setup menu to
enable/disable the password protection
(see sec. 4.5).
Choose an easy-to-remember password
and write it down in a safe place!
Changing the Password
4.2.1.
Select:
1.
Current Conditions (Main Menu)
Setup *
User
Password
* A password may be required to access this menu.
Password
Current mode
Installer
Change User
0 * * *
Change Password
* * * *
Use the adjustment buttons to set the first
2.
number of the password then press the right-
arrow key. Proceed the same way to enter all
numbers of the password then press the right-
arrow key. The user is then identified.
If the installation password or user 2 pass-
3.
word is posted, the prompt
“Change Password”
appears on screen. Use the adjustment buttons
to set the new password code.
Use the adjustment buttons to confirm the
4.
new installer pas sword then press the right-
arrow key to confirm the new password.
4.2.2. Retrieving a Lost Password
Select:
1.
Current Conditions (Main Menu)
Setup *
User
Password
User Password**
* If the controller prompts for a password, enter the
factory password (contact your dealer).
**This menu is accessible from the factory level only.
User Password
User 1:
1111
User 2:
2222
Installer:
0000
The password of all user levels are dis-
2.
played on screen.
4.3. Controller Programs
Program definition:
Programs are an assembly of settings (tem-
perature settings, relay assignment, probe
assignment, etc.) that can be enabled at dif-
ferent moment of the breeding process. In all,
the controller can use 3 different programs.
Automatic program selection:
The controller can automatically switch the
program selection when the animals reach a
certain age and/or as a function of outside
temperature. Refer to the Installation Setup
section of this manual to enable or disable the
automatic program switch (see section 4.5).
Refer to the Installation Setup section
of this manual to set the number of
programs in use and to enable or dis-
able the automatic program switch
(section 4.5).
4.3.1. Program Selection & Settings
The controller can automatically switch the
program selection when the animals reach a
certain age and/or as a function of outside
temperature. If the automatic program switch
option is enabled in the Installation setup (sec.
4.5), you must indicate the moment at which
each program starts.
Make sure the right program is selected
before adjusting any parameter.
Select:
1.
Current Conditions (Main Menu)
Setup *
Program
* A password may be required to access this menu
Summary of Contents for Koolmaster PP20-VS2
Page 47: ......
Page 48: ...REV 00 M 890 00527 rev 00 ...
