44
KOOLMASTER PP20-VS2 rev.00
KOOLMASTER PP20-VS2
Saving a Configuration on
15.3.2.
the Card
The following procedure shows how to
save your controller’s configuration into the
memory card. This will create a configuration
file (*.cfg) on the card.
Access the transfer menu as explained
1.
in section 14.2 and select the
“Controller to
Memory card”
menu.
The name of the configuration file (*.cfg) is
2.
shown at the top of the screen and the table
at the bottom gives information about the
memory card. Press
“Complete”
to save your
controller’s configuration on the card.
Controller to Memory card
Complete
Erase card
Exit
Use to navigate
File_name.cfg
MS300
Total : 8192 KB
Used : 0 KB
Free : 8192 KB
Once the transfer is over, press Exit then
3.
remove the memory card from the connector.
15.4. Firmware Update
Firmware Files (*.fir)
The controller’s firmware contains instruc-
tions and data responsible for controlling the
controller. When a new firmware version is
available, you can install it in your controller
by downloading a firmware file (*.fir) from the
card. Upgrading the firmware will not affect
your parameter settings.
Access the transfer menu as explained in
1.
section 14.2 and select the “Memory card to
controller” menu.
Press and hold the up- and down-arrow
2.
keys simultaneously for 3 seconds. The
Firmware Update menu is displayed.
Controller to Memory card
Next
Exit
Use to navigate
WARNING!!!
It is extremely important
to ensure that the AC power
source is not interrupted
during this process.
This unit may render
inoperable if power fails
during this update.
To continue this process,
press NEXT.
Read the warning message carefully then
3.
press Next.
Select the proper firmware file (*. fir) on
4.
the main screen. The icon indicates which
files can be used for the transfer.
FIRMWARE UPDATE
Select
Exit
File_name.cfg
atm_0_7_30.bin
atm_0_7_30.fir
Press
5.
“Select”
to get information about the
selected firmware file (*.fir).
FIRMWARE UPDATE
Yes
No
Install this firmware?
Name = Atm Advanced
Version= x.y.zz
ReleaseDate=2006-01-01
ModelVersion=0x111A
Press
6.
“Yes”
to install the selected firmware
or select
“No”
to go back to the previous
menu.
Once the transfer is over, press Exit then
7.
remove the memory card from the connector.
15.5. Erasing the Memory
Card
Follow this procedure to delete all the content
of the memory card.
Access the transfer menu as explained in
1.
section 14.2 and select the “Controller to
Memory card” menu.
Press “Erase card” to delete all files that
2.
are stored on the card.
Controller to Memory card
Complete
Erase card
Exit
Use to navigate
Once the card is erased, press Exit then re-
3.
move the memory card from the connector.
Summary of Contents for Koolmaster PP20-VS2
Page 47: ......
Page 48: ...REV 00 M 890 00527 rev 00 ...
