ACLAS EC320, User Settings Manual

Page: 37 / 79

E
C320 User settings manual
42
J-JY-EC320
Modify CODE ID of Data Matrix Modify CODE ID of PDF417 Limited
2.4
Terminating Characters
In order to allow the host to quickly distinguish the results of the current decoding, this feature can be
turned on.
After reading “Add Terminator” to enable this function, if the reading is successful, the reading module
adds the corresponding terminator after decoding the data.
Disable terminator Add terminator CR
Add terminator TAB Add terminator CRLF
2.5
Data segment interception
This function can be turned on when the user only needs to output a part of the decoded
information. We divide the decoding information [Data] into three parts:
[Start] [Center] [End]
The length of the characters in the Start and End segments can be controlled by scan code.
The user can select the decoding information of the corresponding position by scanning the
code as follows.