ACLAS EC320, User Settings Manual

Page: 15 / 79

E
C320 User settings manual
15
Sensitivity
Sensitivity refers to the degree of change in the scene detected in the inductive reading mode.
When the reading module determines that the degree of scene change meets the requirements, it will
switch from the monitoring state to the reading state.
*Normal sensitivity Low sensitivity
High sensitivity Extra high sensitivity
Same barcode read delay
If the same barcode is read several times continuously, it can be required that the reading module
cannot read the same barcode for a continuous period of time in this mode, so that the same barcode
setting code can be read the same as the continuous mode
3.4 Command Trigger Mode
In this mode, the reading module starts reading the code when it receives the scan command sent by
the host (that is, bit 0 of flag 0x0002 is written to "1"), and stops reading after the successful reading of the
code reading or the end of the single reading time. .
Command trigger mode
Note: In the command trigger mode, the serial command that triggers the scan is: 7E 00 08 01 00 02 01
AB CD; after receiving the trigger command, the reading module will output seven bytes of response
information and start the scan synchronously (response Information content: 02 00 00 01 00 33 31)