ACLAS EC320, User Settings Manual

Page: 41 / 79

E
C320 User settings manual
52
J-JY-EC320
2.6
RF information
RF (Read Fail) information refers to the reading module in some modes, when the reading is
unsuccessful, some information that the user is freely defined is output. After the user or the
program detects the information, the corresponding adjustment or operation is performed.
Send RF information Do not send RF information
Modify RF information
Scan the “Modify RF Information” setting code and combine the scan data setting code. The user
can modify the RF information content. It uses two hexadecimal values for each RF character. The
RF can allow up to 15 characters. The hexadecimal value of the character value conversion table
can refer to the appendix
Modify RF information
Example: Modify user-defined RF information to "FAIL"
1. Check the character table to get the hexadecimal value of the four characters "FAIL": "46",
"41", "49", "4C"
2. Confirm that the setup code is enabled. If it is not enabled, please scan the “Enable Setup
Code” setup code (see section 1.5.2).
3. Scan the "Modify RF Information" setting code
4. Scan the data setting codes "4", "6", "4", "1", "4", "9", "4", "C" in sequence.
5. Scan the "Save" setting code