ACLAS EC320, User Settings Manual

Page: 31 / 79

E
C320 User settings manual
42
J-JY-EC320
1.
Check the character table and get the hexadecimal values of the four characters "DATA": "44",
"41", "54", "41"
2.
Confirm that the
setup code is enabled. If it is not enabled, please scan the “Enable Setup Code”
setup code (see section 1.5.2).
3.
Scan the "Modify Prefix" setting code.
4.
Scan data setting codes "4", "4", "4", "1", "5", "4", "4", "1" in sequence.
5.
Scan the "Save" setting code.
2.2
Suffix
Add Suffix
The suffix is a string that is customized by the user after decoding the information. It can be added by
scanning the "Add suffix" setting code.
Add Suffix Clean All Suffix
Modify Suffix
Scan the "Modify Suffix " setting code and combine the scan data setting code,the user can modify
the Suffix content. It uses two hexadecimal values for each suffix character. The suffix allows up to
15 characters. The hexadecimal conversion table of character values reference Appendix D.
Modify Suffix
e.g.,modify the user-defined suffix to "DATA"
1.
Check the character table and get the hexadecimal values of the four characters "DATA": "44",
"41", "54", "41"
2.
Confirm that the setup code is enabled. If it is not enabled, please scan the “Enable Setup Code”
setup code (see section 1.5.2).
3.
Scan the "Modify Suffix " setting code.
4.
Scan data setting codes "4", "4", "4", "1", "5", "4", "4", "1" in sequence.
5.
Scan the "Save" setting code.