5
Important Notifications.
Please read carefully.
WARNING
NOTE: Failure to comply with these instructions may
damage the Aclarus System and/or result in personal injury.
Disconnect power prior to service
This system employs the use of ozone and high voltage (4200 VAC)
Do NOT open Aclarus Ozone System electrical enclosure when system is
on and/or plugged in
Do NOT exceed 70psi pressure in system
Do NOT run system without water in it
Do perform water quality testing upon install and at regular intervals.
Prime system with ozone before use and after extended periods of not
running.
Do perform required maintenance duties
Aclarus is not responsible for damage to person or property due to misuse,
improper maintenance, fluctuations in water quality.
Maintenance Duties
NOTE: Failure to comply with these instructions will damage your Aclarus
System and VOID your warranty.
1)
Check silica in the air dryer weekly.
Refer to instruction sheet located in this guide.
2)
Check operation indicator lights bi-weekly to ensure effective system
operation.
Ensure lights are on during system operation.
3)
Check the ozone system monthly.
Ensure there are no obvious leaks or problems visible with the systems operation.
Immediately report any major concerns.
4)
Immediately check your system and perform corrective action as required if
there is any noticeable difference in the waters taste, appearance or smell or if
water tests show contamination.
Contact your Aclarus rep as required.
Summary of Contents for AOWT-7
