ACKERMANN 16-2000-700 Instructions For Use Manual Download Page 46

Page: 46 / 134

USER MANUAL 16-2000-700/701/702/703

Rev. 05/2018

8.3 Operating mode selection

To select the operating mode and set its parameters, please perform the following

procedures:

STEP 1

Touch the panel corresponding to the output to which a given accessory is connected.
The entire panel area is active.

control panel of the socket to which the instrument is connected

detection bar indicating the instrument connected to output 3

Fig. 21. Operating mode selection – step 1.

If an ASD instrument is connected to an output with the instrument detection system
(

Fig. 1 items 1, 3, 4

), the device will automatically limit the list of available modes

(see section 7.4), and will set the suggested mode for the connected instrument.

STEP 2

Expand the list of available modes by touching any cutting mode icon (in order to set
the desired cutting mode in the next step), or any coagulation mode icon (in order to

set the desired coagulation mode).

Page: 46 of 134

Summary of Contents for 16-2000-700







































































































































Search results

Summary of Contents for 16-2000-700

Reviews:

Related manuals for 16-2000-700

Brands by name

Popular brands

ACKERMANN 16-2000-700, Instructions For Use Manual

Search results

Summary of Contents for 16-2000-700

Reviews:

Related manuals for 16-2000-700

Brands by name

Popular brands