ACKERMANN 16-2000-700, Instructions For Use Manual, Page: 132 / 134

USER MANUAL 16-2000-700/701/702/703 Rev. 05/2018
Guidance and manufacturer's declaration – electromagnetic immunity
HF 16-2000-700 is intended for use in the electromagnetic environment specified below. The customer or the
user of the HF 16-2000-700 should assure that it is used in such an environment.
IMMUNITY test IEC 60601
test level Compliance level Electromagnetic
environment - guidance
Electrostatic discharge
(ESD)
IEC 61000-4-2
±6 kV contact
±8 kV air
±6 kV contact
±8 kV air
Floors should be wood,
concrete or ceramic tie. If
floors are covered with
synthetic material, the relative
humidity should be at least
30%.
Electrical fast
transient/burst
IEC 61000-4-4
±2 kV for power supply
lines
±1 kV for input/output
lines
±2 kV for power supply
lines
±1 kV for input/output
lines
Mains power quality should be
that of a typical commercial or
hospital environment.
Surge
IEC 61000-4-5
±1 kV line(s) to line(s)
±2 kV line(s) to earth
±1 kV differential mode
±2 kV common mode
Mains power quality should be
that of a typical commercial or
hospital environment.
Voltage dips, short
interruptions and
voltage variations in
power supply input lines
IEC 61000-4-11
< 5% U
T
(> 95% dip in U
T
)
for 0.5 cycle
40% U
T
(60% dip in U
T
)
for 5 cycles
70% U
T
(30% dip in U
T
)
for 25 cycles
< 5% U
T
(> 95% dip in U
T
)
for 5 s
< 5% U
T
(> 95% dip in U
T
)
for 0.5 cycle
40% U
T
(60% dip in U
T
)
for 5 cycle
70% U
T
(30% dip in U
T
)
for 25 cycles
< 5% U
T
(> 95% dip in U
T
)
for 5 cycles
Mains power quality should be
that of a typical commercial or
hospital environment.
If it is necessary to continue
the operation during mains
power interruptions, it is
recommended that the HF
16-
2000-700 is powered from an
uninterruptible power supply or
a battery.
Power frequency (50/60
Hz)
magnetic field
IEC 61000-4-8
3 A/m 3 A/m Power frequency magnetic
fields should be at levels
characteristic of a typical
location in a typical commercial
or hospital environment.
NOTE 1: U
T
is the a.c. mains voltage prior to application of the test level.
Guidance and manufacturer's declaration – electromagnetic immunity
HF 16-2000-700 is intended for use in the electromagnetic environment specified below. The customer or the
user of the HF 16-2000-700 should assure that it is used in such an environment.
IMMUNITY test IEC 60601
test level
Compliance level Electromagnetic
environment - guidance
Portable and mobile RF
communications equipment
should be used no closer to
any part of the
HF 16-2000-700
, including cables, than the
recommended separation
distance calculated from the
equation applicable to the
frequency of the transmitter.
Recommended separation
distance:
Conducted RF
IEC 61000-4-6
3 V
RMS
150 kHz to 80 MHz
3 V
RMS
D = 1.2
√
P
Radiated RF
IEC 61000-4-3 3 V/m
80 MHz to 2.5 GHz 3 V/m
D = 1.2
√ P
80 MHz to
800 MHz
d = 2.3
√ P
800 MHz to
2.5 GHz
Page: 132 of 134