ACKERMANN 16-2000-700 Instructions For Use Manual Download Page 34

Page: 34 / 134

USER MANUAL 16-2000-700/701/702/703

Rev. 05/2018

Fig. 15. Effect adjustment by the footswitch.

7.6.3 Argon flow settings

In order to change the

argon flow setting

and to

prime the ducts with argon

after selecting the appropriate mode, click the icon labelled Argon

(Fig. 7, item 10)

The argon flow adjustment option for a given mode, and the argon duct priming icon
will appear on the screen. To change the argon flow settings, touch the appropriate

arrows on the argon flow scale.
Before starting work, fill-up the argon ducts with the gas by pressing the PURGE

icon.
In argon-enhanced endoscopic coagulation modes, the argon flow can be adjusted in

a limited range to 2.5 l/min.

Page: 34 of 134

Summary of Contents for 16-2000-700







































































































































Search results

Summary of Contents for 16-2000-700

Reviews:

Related manuals for 16-2000-700

Brands by name

Popular brands

ACKERMANN 16-2000-700, Instructions For Use Manual

Search results

Summary of Contents for 16-2000-700

Reviews:

Related manuals for 16-2000-700

Brands by name

Popular brands