ACKERMANN 16-2000-700 Instructions For Use Manual Download Page 36

Page: 36 / 134

USER MANUAL 16-2000-700/701/702/703

Rev. 05/2018

7.6.3.1 Cautions for using argon-enhanced coagulation

WARNING

Fill the instruments with argon before each procedure. To do this, press the

argon duct filling button.

When using non-primed argon instruments, air can be introduced into the

tissues.

CAUTION

The flexible argon electrode should not be placed directly on the tissue.

Do not blow argon into the vascular system.

During laparoscopic surgeries, argon flow causes an increase in insufflation
pressure.

WARNING

PERFORMING ARGON-ENHANCED LAPAROSCOPIC PROCEDURES IS ONLY

ALLOWED WITH INSUFFLATORS HAVING A PRESSURE NIVELATION FUNCTION.
In case of doubt, consult the insufflator supplier to confirm that the insufflator

has such function.

IMPORTANT NOTICE

To prevent sudden increase in insufflation pressure during argon application, the trocar

valve should be open. If the pressure reaches the critical level, stop argon application
and wait until the pressure decreases below this level.

Independently of monitoring the pneumoperitoneum pressure using the
insufflator, a separate, continuous pressure control by the operating team is

required.

Always consult the instructions for use of argon accessories.

Page: 36 of 134

Summary of Contents for 16-2000-700







































































































































Search results

Summary of Contents for 16-2000-700

Reviews:

Related manuals for 16-2000-700

Brands by name

Popular brands

ACKERMANN 16-2000-700, Instructions For Use Manual

Search results

Summary of Contents for 16-2000-700

Reviews:

Related manuals for 16-2000-700

Brands by name

Popular brands