ACKERMANN 16-2000-700 Instructions For Use Manual Download Page 38

Page: 38 / 134

USER MANUAL 16-2000-700/701/702/703

Rev. 05/2018

7.6.4 Power monitoring

HF 16-2000-700 uses sophisticated monitoring system, that constantly checks

parameters on output in real-time and immediately changes the output power to
varying conditions in the operation area.

Most of the modes have two key parameters: Effect and Power. Effect adjusts the

desired result on the tissue. Power is adjusted automatically to achieve the
chosen effect, and the value shown on screen is the upper limit of power

generated by the HF unit.

The device has a power monitoring tool, that shows the actual generated power
on the output.

Power Monitor

Fig. 17. Power Monitor

The illustration below shows the power measurement graph. Last 60 seconds of
activation is displayed, including pauses.

Figure 18.

Power monitoring graph.

The graph shows the current power output. Under the graph there is also
average value in Watts W.

Page: 38 of 134

Summary of Contents for 16-2000-700







































































































































Search results

Summary of Contents for 16-2000-700

Reviews:

Related manuals for 16-2000-700

Brands by name

Popular brands

ACKERMANN 16-2000-700, Instructions For Use Manual

Search results

Summary of Contents for 16-2000-700

Reviews:

Related manuals for 16-2000-700

Brands by name

Popular brands