ACKERMANN 16-2000-700 Instructions For Use Manual Download Page 77

Page: 77 / 134

USER MANUAL 16-2000-700/701/702/703

Rev. 05/2018

8.13.1 Catalogue

To review the catalogue of accessories, click the Catalogue icon.

Figure 39. Catalogue of accessories.

Catalogue updates are free of charge. The medical representative can update the

catalogue during a commercial visit.

8.13.2 Change of text and message language

The

HF 16-2000-700

system offers an option of selecting the language for texts and

messages that appear on the touch panel of the system. To change the language, click
the field with the selected language version. Depending on system version, the

language versions may differ. However, there are always two basic versions, i.e. Polish
and English.

Figure 40. Language selection for texts and messages.

Page: 77 of 134

Summary of Contents for 16-2000-700







































































































































Search results

Summary of Contents for 16-2000-700

Reviews:

Related manuals for 16-2000-700

Brands by name

Popular brands

ACKERMANN 16-2000-700, Instructions For Use Manual

Search results

Summary of Contents for 16-2000-700

Reviews:

Related manuals for 16-2000-700

Brands by name

Popular brands