70
Chapter 4
IRQ Setting Error
Expansion ROM Allocation Fail
I/O Resource Conflict(s)
Memory Resource Conflict(s)
1. Load default settings in Setup.
2. Enter BIOS Setup and set the
Reset Resource
Assignments
of the
PnP/PCI Options
to Yes, then
reboot the system.
3. Remove all adapter cards that are NOT factory-
installed, then reboot the system
1.
PCI Device Error
1. Load default settings in Setup.
2. Enter BIOS Setup and set the
Reset Resource
Assignments
of the
PnP/PCI Options
to Yes,
then reboot the system.
3. Remove all adapter cards that are NOT factory-
installed, then reboot the system.
DMI Table Was Destroyed
1. Flash BIOS
Press
Ctrl
+
Alt
+
Esc
key to enter Setup or F1 key to
continue
1. Press
Ctrl+Alt+Del
to enter Setup and reconfigure the
system.
Press
Esc
to turn off NMI, or any key to reboot
1. Press
Esc
to reject NMI error or press any other key to
reboot the system.
Insert system diskette and press <Enter> key to
reboot
1. Insert a bootable disk into the floppy disk drive or
remove this disk if a hard disk is installed.
BIOS Messages
Action/FRU
Summary of Contents for Veriton FP2
