Acer Veriton FP2, Service Manual

Page: 51 / 124

Chapter 2 45
NOTE: *: ignore TV related settings
Parameter Description Options
Spread Spectrum This parameter lets you enable or disable the
spread spectrum. Enabled or Disabled
ICH Audio Codec This parameter lets you enable or disable the
ICH Audio Codec. Enabled or Disabled
ICH SMBUS Controller This parameter lets you enable or disable the
ICH SMBUS controller. Enabled or Disabled
Delay Transaction This parameter lets you enable or disable delay
transaction. Enabled or Disabled
Determine DIMM Frequency This parameter lets you set the frequency of
DIMM. Auto , PC100 or PC133
Show VGA BIOS message When Disable, it won't display VGA BIOS
Copyright message during POST. When
Enabled,it will dispaly VGA BIOS Copyright
message druing POST. Disabled or Enabled
Graphic Device Scaling This setting for LCD monitor When Auto, Scale
screen's picture determined by EDID. When
Force On, Force Scaling screen picture and
regardless of hardware support. When Disable,
disable scale function Auto , Force On or Disabled
TV format* NTSC
Display Device Synchronous When Enabled : Display CRT and Flat Panel at
same time. When Disabled : Only one Display
Device has picture (CRT or Flat Panel)
Enabled or Disabled
Display Device priority FP : 1st priority
CRT : 2nd priority
TV : 3th priority
FP/CRT/TV
Unlock Hot Swap Device This is a way you can remove hot swap device.
When you select “Enabled”, SETUP utility will
give you 20 seconds to remove hot swap device.
After that, the option will become “Disabled” and
SETUP will lock device again. Disabled or Enabled