Acer Veriton FP2, Service Manual

Page: 31 / 124

Chapter 2 25
Product Information
The screen below appears if you select Product Information from the main menu:
NOTE: The asterisk (*) mark indicates that the parameter appears only when you are in the Advanced Level.
The Product Information menu contains general data about the system, such as the product name, serial
number, BIOS version, etc. These information is necessary for troubleshooting (maybe required when asking
for technical support).
The following table describes the parameters found in this menu:
Parameter Description
Product Name Displays the model name of your system.
System S/N Displays your system’s serial number.
Main Board ID Displays the main board’s identification number.
Main Board S/N Displays your main board’s serial number.
System BIOS Version Specifies the version of your BIOS utility.
SMBIOS version The System Management Interface (SM) BIOS allows you to check your
system hardware components without actually opening your system.
Hardware checking is done via software during start up. This parameter
specifies the version of the SMBIOS utility installed in your system.
System BIOS ID Specifies the version of the BIOS.
BIOS Release Date Displays the release date of the BIOS.
Product Information
Product Name ................... Acer Veriton FP2
System S/N ..................... 0000000000000000
Main Board ID .................. S511P
Main Board S/N ................. N/A
System BIOS Version ............ V4.0
SMBIOS Version ................. 2.3
*System BIOS ID.................. R01-A0 EN
*BIOS Release Date............... Jan 03,’00