![background image](http://html1.mh-extra.com/html/acer/veriton-fp2/veriton-fp2_service-manual_4276500030.webp)
24
Chapter 2
IDE Secondary Channel
Master
Specifies the current configuration of the IDE
device connected to the master port of the
secondary IDE channel.
Drive type, capacity
IDE Secondary Channel
Slave
Specifies the current configuration of the IDE
device connected to the slave port of the
secondary IDE channel.
Drive type, capacity
Total Memory
Specifies the total amount of onboard memory.
The memory size is automatically detected by
BIOS during the POST. If you install additional
memory, the system automatically adjusts this
parameter to display the new memory size.
Memory size in MB
1st Bank
Indicates the type of DRAM installed in the DIMM
1 socket. The None setting indicates that there is
no DRAM installed.
DIMM type, capacity in MB
2nd Bank
Indicates the type of DRAM installed in the DIMM
2 socket. The None setting indicates that there is
no DRAM installed.
DIMM type, capacity in MB
Serial Port
If enabled, indicates the IRQ assigned to serial
port .
IRQ
Parallel Port
If enabled, indicates the IRQ and Direct Memory
Address (DMA) assigned to the parallel port.
DMA, IRQ
PS/2 Mouse
Specifies the presence of a PS/2 mouse
Installed or Disabled
Parameter
Description
Format
Summary of Contents for Veriton FP2
