Acer Veriton FP2, Service Manual

Page: 41 / 124

Chapter 2 35
Num Lock After Boot Allows you to activate or deactivate the Num
Lock function upon booting. Enabled or Disabled
Memory Test Lets you specify whether you want BIOS to
perform or bypass the memory test. This
parameter is only available when Fast Boot is
disabled. Disabled or Enabled
Configuration Table This parameter allows you to enable or disable
the display of the configuration table after POST
but before booting. The configuration table gives
a summary of the hardware devices and settings
that BIOS detected during POST. Enabled or Disabled
Update BIOS w/ Boot Block When enabled, it automatically flashed the BIOS
file from the hard disk drive in case the system
fails to boot up.
Disabled or Enabled
Network Boot ROM
Function When Disabled, BIOS doesn’t initialize LAN’s
boot ROM. When enabled, BIOS will initialze
LAN’s boot ROM. After enabling this function, the
system need to exit SUTUP utility. System
reboot. Enter System utility again and choose
“Boot Options” menu. User will see a new(the
4th) Boot Sequence item, [Intel (R) Boot Agent
Version 3.0] Disabled or Enabled
Parameter Description Options