Acer PW.NAT05.002 Page 37 User Manual Download

Page: 37 / 72

Add-in cards

The computer does not recognize an add-in

card

•

Shut down and restart your computer.

•

Make sure that you have installed the

required software. For more information,

see the documentation that came with

your add-in card.

Audio

See

“Sound” on page 43

CD or DVD drives

See

“Optical disc drives” on page 39

DVD drives

•

See

“CD or DVD drives” on page 27

Ethernet

You cannot see the other computers on your

network

•

Make sure that your Ethernet cable is

plugged into the Ethernet jack on your

computer. Make sure that the other end

is plugged into a router.

•

Make sure that all computers are

plugged into a powered electrical outlet

and turned on.

•

Make sure that the router is plugged into

a powered electrical outlet and turned

on. Most routers have lights that indicate

they are working. For more information,

see

the documentation that came with

your router.

•

Make sure that all computers on your

network have the same workgroup

name.

MU0000000_eM_ENG_V09A3.book Page 27 Wednesday, August 19, 2009 5:06 PM

Summary of Contents for PW.NAT05.002









































































Search results

Summary of Contents for PW.NAT05.002

Reviews:

Related manuals for PW.NAT05.002

Brands by name

Popular brands

Acer PW.NAT05.002, User Manual

Search results

Summary of Contents for PW.NAT05.002

Reviews:

Related manuals for PW.NAT05.002

Brands by name

Popular brands