Acer PW.NAT05.002 Page 59 User Manual Download

Page: 59 / 72

4 Insert the second recovery disc when prompted,

then follow the on-screen prompts to complete

the recovery.

Telephone support

Before calling Customer Care

If you have a technical problem with your

computer, follow these recommendations

before contacting Customer Care:

•

Make sure that your computer is

connected correctly to a grounded

AC power outlet that is supplying power.

If you use a surge protector, make sure

that it is turned on.

•

If a peripheral device, such as a keyboard

or mouse, does not appear to work, make

sure that all cables are plugged in

securely.

•

If you have recently installed hardware or

software, make sure that you have

installed it according to the instructions

provided with it. If you did not purchase

the hardware or software from

eMachines, see the manufacturer’s

documentation and technical support

resources.

•

If you have “how to” questions about

using a program, see:

•

Online Help

•

Printed documentation

•

The Microsoft Windows

documentation

•

The software publisher’s Web site

MU0000000_eM_ENG_V09A3.book Page 49 Wednesday, August 19, 2009 5:06 PM

Summary of Contents for PW.NAT05.002









































































Search results

Summary of Contents for PW.NAT05.002

Reviews:

Related manuals for PW.NAT05.002

Brands by name

Popular brands

Acer PW.NAT05.002, User Manual

Search results

Summary of Contents for PW.NAT05.002

Reviews:

Related manuals for PW.NAT05.002

Brands by name

Popular brands