Acer PW.NAT05.002 Page 6 User Manual Download | Manualshive

Page: 6 / 72

background image

:

iv

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org.

ENERGY STAR

Acer

's ENERGY STAR qualified products save your

money by reducing energy cost and protecting the
environment without sacrificing features or performance.

Acer

is proud to offer our customers products with the

ENERGY STAR mark.
What is ENERGY STAR?
Products that are ENERGY STAR qualified use less energy

and prevent greenhouse gas emissions by meeting strict energy efficiency
guidelines set by the U.S. Environmental Protection Agency.

Acer

is

committed to offer products and services worldwide that help customers save
money, conserve energy and improve the quality of our environment. The more
energy we can save through higher energy efficiency, the more we reduce
greenhouse gases and the risks of climate change. More information refers to
http://www.energystar.gov or http://www.energystar.gov/powermangement.

Note: The statement above is applicable only to

Acer

system

with an ENERGY STAR sticker.

Acer

ENERGY STAR qualified products:

•

Produce less heat and reduce cooling loads, and warmer climates.

•

Automatically go into "display sleep" and "computer sleep" mode after

10 and 30 minute of inactivity respectively.

•

Wake the computer from sleep mode by pushing keyboard or moving

mouse.

•

Computers will save more than 80% energy at "sleep" mode.

ENERGY STAR and the ENERGY STAR mark are registered U.S. marks

MU0000000_eM_ENG_V09A3.book Page iv Wednesday, August 19, 2009 5:06 PM

«
...
4
5
6
7
8
...
»

Summary of Contents for PW.NAT05.002









































































Reviews:

No comments

Related manuals for PW.NAT05.002

Brand: Acer Pages: 20

Brand: Acer Pages: 20

Brand: Acer Pages: 18

Brand: Acer Pages: 30

Brand: Acer Pages: 106

Brand: Acer Pages: 83

Brand: Acer Pages: 81

Brand: Acer Pages: 89

T230H - Bmidh Wide Touch Screen Display

Brand: Acer Pages: 12

Brand: Acer Pages: 100

Brand: Gateway Pages: 126

Brand: EUROCOM Pages: 1

StorageWorks 4300

Brand: Compaq Pages: 21

Professional Computer

Brand: Wang Pages: 276

Brand: Medion Pages: 2

Brand: Gigabyte Pages: 2

6005 - Pro Microtower PC

Brand: Compaq Pages: 4

PCG-VX88 VAIO User Guide (primary manual)

Brand: Sony Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands